Honda S2000 Airbox Resonator Blanking Plug Installation Guide

Honda S2000 Airbox Resonator Blanking Plug Installation Guide

✅ What You’ll Need for prep work and installation:

• 4mm Alen key

Fitting Instructions:

1. Open the air filter box top cover 

2. Remove the air filter

3. Resonator blanking installation

Prepare the blanking plug by moving the retainer as far as back as possible, just leave few threads of the M5 screw engaged.

Insert the plug in to the resonator opening, tilting 90 degrees maki sure the retainer is as far from the plug as possible, the logo should be towards the air box far vertical wall.

Once in place rotate 90degrees so the logo is at the bottom of the air box, use 4mm alan key to tighten the screw ,the plug foam pad will align with the opening and form air tight seal. Don't user power tools, just hand tighten the screw.

4. Install the air filter

5. Close the air filter box top cover 

6. Go for drive and enjoy deeper sound.