Pictures are comming soon...

Honda S2000 Emblem Installation Guide

✅ What You’ll Need:

  • 70% Isopropyl Alcohol (IPA) or 99% IPA diluted with water

  • Clean microfiber cloth

  • Masking tape or small magnets

  • Double-sided automotive-grade tape

  • Optional: Old emblems (if reusing)

Step-by-Step Instructions:

1. Prepare the Surface

  • Clean the area where the emblems will be installed.

  • Ensure the surface is free of dust, dirt, and grease.

  • Use 70% IPA and a clean microfiber cloth to wipe the car body panel area thoroughly.

  • If using 99% IPA, mix it with water to achieve a 70% concentration.

2. Secure the Template

  • Use masking tape or small magnets to hold the emblem fixture/template in place.

  • Make sure it’s properly aligned before continuing.

3. Prepare the Emblems

  • If reusing old emblems, remove any old adhesive residue.

  • Clean the backside of each emblem using IPA.

  • Apply fresh double-sided tape to the back of the emblems.

4. Install the Emblems

  • Carefully place each emblem into its designated slot on the fixture.

  • The emblems should slide in easily.

  • ⚠️ Do not force them into place.

5. Apply Pressure

  • Press gently on each emblem to ensure the tape fully contacts the surface.

6. Finalize Installation

  • Remove the masking tape or magnets holding the fixture/template.

  • Allow the double-sided tape to settle and bond—follow the manufacturer’s recommended time for best results.

All Done!

Enjoy the refreshed look of your Honda S2000.